Generic Vango poled awning instructions

Modified on Fri, 21 Aug, 2015 at 9:14 AM

Please follow the below instructions in order to pitch your awning correctly:


  • Assemble the poles and insert into pole sleeves. 
  •  Locate one end of the poles in Ring & Pin system as Figure 1 below. 
  •  Push poles into an arch from opposite side and locate other pole end on to corresponding Ring & Pin system on flysheet. 

  •  Tension the webbing strap at the pole end. 
  •  Position open end of awning towards tent front door. 
  •  Secure in position by zipping awning onto corresponding zip at front of tent and clipping the rear awning clips onto the front tent pole. 

  •  Peg out awning base at contact point with tent and attach rear side awning clips to front tent pole. 

  •  Peg out front of awning and front guylines. 
  •  Peg out ALL remaining guylines and peg points as figure 2.


Figure 1


Figure 2